Ratings
26kA for 1 sec up to 400A
50kA for 1 sec up to 3200A
50kA for 3 sec up to 3200A
80kA for 1 sec up to 3200A

Busbars
3, 4 pole
Top, rear

Power supply
Up to 690 V
3 phase, 3 and 4 wire

Panel depths (standard)
400, 650mm
1100mm (back to back)

Panel heights (standard)
2300mm (modular)
2400mm (fully welded)

Panel heights (non standard)
Available on request

Internal separation
Form 2, 4a, 4b (type 2, 3, 4, 5, 6 and 7)

Ingress protection
Up to IP 54

Cabling
Access: front / rear
Approach: top / bottom

Standard service conditions
Indoors
Peak 40 °C
24-hour average < 35 °C
Minimum -5 °C
Pollution degree 3
Altitude <2000 m
Outdoors
Peak 40 °C
24-hour average < 35 °C
Minimum -25 °C
Pollution degree 3
Altitude <2000 m

Motor Control Centres

Saftronics' MCCs provide both conventional and intelligent solutions that offer outstanding reliability and functionality. We have been designing MCCs for many years and this shows in the quality of our products.

All of our products have been rigorously and independently tested and comply with all industry standards, health and safety requirements and relevant certifications.

We offer increased design flexibility by providing certified corner units, bus bridges and rear connection boxes for top-rear cable entry.

All metalwork is designed using 3D modelling software prior to manufacture allowing special panels to be manufactured to suit every application.

We own the copyright and intellectual property rights for all metalwork and busbar systems.


Key Features


50kA and 80kA MCCs

  • fixed-pattern design
  • up to 690 volts supply
  • back-to-back products available,
    with both top and bottom access as standard
  • market-leading product
  • extensive library of tested designs
  • BS EN 61439 compliant

26kA MCCs

  • fixed-pattern design
  • up to 690 volts supply
  • 40% smaller footprint than
    50kA and 80kA assemblies
  • up to 40% cost saving on metalwork and
    busbars compared to 50kA and 80kA assemblies
  • BS EN 61439 compliant